Guide to choose a servo drive

May 28, 2022

Servo drives are widely used in various industries and occupy a very important position, and servo drives must meet the requirements of different motors. Users should pay attention to the relevant parameter selection when purchasing servo drives with stable performance, so as to effectively use the drive to play a suitable speed of use, improve the performance of the motor, and reduce errors.

So what related matters should be paid attention to when choosing a servo drive?

Step 1: Choose according to the requirements of the equipment parameters

When purchasing a servo drive, the user should choose according to the different parameters of the motor equipment used. The specific parameter values include the requirements of accuracy, speed or power, torque and inertia. It is not that the larger the parameter value, the better, but that the motor used can be controlled to be considered a reasonable use.

Step 2: Determine the operating power of the motor
In the selection process of servo drives, attention should also be paid to the type of motor and operating power. Brushed or brushless DC motors will have different performances in operating power, and the required servo drives will also be different. Therefore, if the driver can have good control ability, it is necessary to select according to the operating power of the motor.
Step 3: Corresponding servo system
The servo drive needs to complete the control of the entire operation through the servo system, so it is necessary to select a set of servo system that can match it to form a good operation, so that the whole process can reduce the failure phenomenon of poor coordination during use, and can also avoid The whole servo drive is not operating to the best effect.
When selecting a servo driver, you need to pay attention to the equipment parameter requirements, the operating power of the motor and the corresponding servo system, etc. In the actual selection process, it is necessary to select a servo driver with good stability from the feedback components and control methods to cope with various problems. overshoot caused by a load. In addition, users can ask professional designers and technicians to assist in the purchase when choosing a servo drive, so as to obtain more accurate motor parameters and improve the performance of the servo in use.

Προηγούμενος

Επικοινωνήστε μαζί μας

Author:

Mr. Robort

Phone/WhatsApp:

+8613357159418

δημοφιλή Προϊόντα

Εταιρικά Νέα